This guide has been produced to enable you to measure a room for your chosen floorcovering and should not be considered an
installation guide.
For your calculation you will need paper, a pen or pencil, tape measure, calculator and information on the width/sizes
available in your chosen products.
When measuring your rooms you should always ensure that you keep the flooring running in the same direction to maintain
texture, pattern and colour consistency. If you change the direction then the pattern, texture and the pile of the
carpet will reflect light differently.
You will need to measure your room at the widest point taking
into account any bay windows and door entrances as below. Once you have these measurements you need to add 10cm on
all sides to allow for cutting in during your installation.
When you have the room width you need to check that it is less than the width of the carpet you are buying to avoid
any joins, for instance if your room width is 4.4m wide and the carpet you are buying is available in 4m and
5m widths then you can buy the 5m wide product. If the carpet is only 4m wide then you will need to buy either the
length of the room by the width twice and use the second piece as a filler to give you your 4.4m width or if you are
fitting another room you may find that you have excess from this room that can be utilised as the filler.
When measuring a hallway, stairs and a landing you will need to take additional measurements. You should start by measuring the length and
width of the hallway as you can see from the plan to the right. You should stand with your back against the wall and the length of your hallway
will become your length and the measurement across your hall would become your width.
You need to measure the stairs taking into account the tread and the riser. For ease and if these are all the same you
can measure the bottom riser and tread and then multiply this by the quantity of steps.
When this has been completed you then need to measure your landing.
Once all measurements have been taken you can plan what you need to buy taking into account the width of carpet you wish
to purchase. In the event that the width of the hallway or landing is greater than the width of the available
flooring then you will need to include a join. This area can be used as an infill from excess from the other areas
if available.
- Seams should run towards primary light sources where possible and be kept to a minimum where possible.
- Seams should always be kept to a minimum and avoided where possible
- Carpet should all run in the same direction
- Always begin measurements in the centre of doorways rather than the bottom of walls.
- You should allow extra in your purchase for patterned goods such as Wilton, Graphics etc to allow for pattern matching.
- Colour is difficult to match between dye batches and different widths so we would recommend that you purchase all you require at the same time specifying all cuts to come from the same dye batch
You will need to measure your room at the widest point taking into account any bay windows and door entrances as below.
Once you have these measurements you
need to add 10cm on all sides to allow for cutting in during your installation.
When you have the room width you need to check that it is less than the width of the Vinyl you are buying to avoid any
joins, for instance if your room width is 4.4m wide and the Vinyl you are buying is available in 4m and 5m widths then
you can buy the 5m wide product. If the Vinyl is only 4m wide then you will need to buy either the length of the room
by the width twice and use the second piece as a filler to give you your 4.4m width or if you are fitting another room
you may find that you have excess from this room that can be utilised as the filler.
- Seams should never fall perpendicular to doorways – not in main thoroughfares.
- Seams should run toward primary light sources where possible and be kept to a minimum where possible.
- Seams should always be kept to a minimum and avoided where possible
- Always begin measurements in the centre of doorways rather than the bottom of walls.
- You should allow extra in your purchase for patterned goods to allow for pattern matching.
You will need to measure your room at the widest point taking into account any bay windows and door entrances as below.
Once you have these measurements you need to add 10% to allow for wastage.
To work out how many packs you will need find your chosen product which will show how many square metres a pack
will cover, you will then need to divide your room size (in square metres) by the quantity of square metres per
pack and this will give you how many packs you need. If you have taken your measurements in a different unit then
we have listed a helpful conversion table below.
You will need to measure your room at the widest point taking into account any bay windows and door entrances as
below. Once you have these measurements you need to add 10% to allow for wastage.
To work out how many packs you will need find your chosen product which will show how many square metres a pack will
cover, you will then need to divide your room size (in square metres) by the quantity of square metres per pack and
this will give you how many packs you need. If you have taken your measurements in a different type then have listed
a conversion table below.
You will need to measure your room at the widest point taking into account any bay windows and door entrances as
below. Once you have these measurements you need to add 10% to allow for wastage.
To work out how many packs you will need find your chosen product which will show how many square metres a pack will
cover, you will then need to divide your room size (in square metres) by the quantity of square metres per pack and
this will give you how many packs you need. If you have taken your measurements in a different type then have listed
a conversion table below.
1 yard = 0.9144 metres
1 foot = 0.3048 metres
1 inches = 0.0254 metres
1 centimetres = 0.01 metres
1 millimetres = 0.001 metres
1 square yard = 0.83612736 square metres
1 square foot = 0.09290304 square metres